Sipario sound-absorbing system is made of modular panels with steel frame and washable, removable covering, made with Snowsound-Fiber technology applied with Velcro to the structure. The structure is anchored to the wall by chromed metal clamps equipped with special springs that give the structure elasticity while also making it possible to adjust the distance from the wall and the tilt of the panels, to regulate the sound-absorption level of every configuration, adapting it to a variety of needs. The composition of the panels creates a diversity of configurations, allowing the designer ample freedom of interpretation.
About the Snowsound Acoustic Range
The issue of acoustics is very complex, extremely simple and non-invasive solutions are needed to resolve it. The project developed with Caimi is an acoustic panel that is made with one single material, polyester, which in addition to its excellent absorbent qualities is completely recyclable, as it does not contain any other materials. Snowsound Acoustic Panels are light, colourful and sufficiently basic to be used even to personalise the surrounding area, as it can be fully inserted in a contemporary context. It can be hung and supported on a stand: it is practical and inexpensive.
Sound is formed by waves that tend to be reflected from solid surfaces having limited absorption capacity therefore making it difficult to listen and converse within your office environment. The sound absorbing characteristics of traditional products tend to demonstrate less capacity to absorb low frequencies (below 500Hz), progressively more with regard to the midrange (between 500 and 2,000Hz) and to a greater extent with regard to the high frequencies (above 2,000Hz).
In the designing of these acoustic panels the objective set was to obtain the entire recyclability of the product at the end of its useful life, in a manner both simple and rapid. For this reason, the panels have been made entirely of polyester; therefore they are "single material" and 100% recyclable without the need of having to separate the outer fabric from the sound-absorbing inner material. Also, all components are made of single materials, plastic or metal and easily disassembled, thus permitting recycling the whole product at 100%.
The number and variety of attachment systems make it possible to meet various acoustic exigencies, designing and architectural. The application of the panels can be: to walls, ceilings, wiring, with magnetic fittings or on self-supporting structures. For more information please do not hesitate to contact us.
Rooms with limited absorption capacity such as, for example, concrete, marble, or glass
Siparior Wall Mount
Sipaorio Triangle AboveSipaorio rectangule: 120cm X 200cm